Prepare Software Packages

Before you install ZStack Cloud, prepare the following software packages:
  • ZStack Cloud custom ISO:
    • Software (C76): ZStack-Cloud-x86_64-DVD-4.3.0-c76.iso
    • Download address: Click here.
  • ZStack Cloud installation package:
    • Software: ZStack-Cloud-installer-4.3.0.bin
    • Download address: Click here.
Note: After you download the software packages, check the MD5 hash by using a MD5 checker to verify software integrity.

Hardware Requirements

The following table takes a single server deployment (All-in-One) as an example to describe the configuration requirements over the server and other hardware devices for the installation and deployment of ZStack Cloud.
Device Configuration Requirements
Server
  • CPU: support for 64 bit, Intel VT or AMD V virtualization hardware extensions, and with no lower than 4 cores
  • Memory: no lower than 8 GB for basic demonstration environments and no lower than 64 GB for production environments
  • At least 1 SATA hard disk with no lower than 1 TB of storage capacity
  • At least a one-gigabit NIC
Network Switch
  • At least a one-gigabit switch, ten-gigabit switch recommended
  • Several Category 5 jumpers

Burn Image to U Disk

This topic describes how to use UltraISO to burn the prepared ISO image file to a U disk.
  1. Use UltraISO to open the ISO image file.

    Open UltraISO, click the File button, and open the downloaded ISO image file.

    Figure 1. Use UltraISO to Open ISO Image File


  2. Write the Image.

    In UltraISO, choose Bootable > Write Disk Image.

    Figure 2. Write Disk Image on UItraISO


  3. Select a U disk from the Disk Drive drop list to burn the image file.
    Note:
    • If only one U disk is available, the U disk is used to burn the image file by default. Note that before you burn the image file, backup the data on the U disk.
    • Use the default settings for the other parameters and then click Write.
    Figure 3. Confirm to Write ISO Image on UltraISO


  4. On the page that appears, click Yes. Then UltraISO burns the ISO image file to the U disk.
  5. Then the U disk is used as the startup disk that supports the Legacy and UEFI boot modes.
Download

Already filled the basic info? Click here.

Enter at least 2 characters.
Invalid mobile number.
Enter at least 4 characters.
Invalid email address.
Wrong code. Try again. Send Code Resend Code (60s)

An email with a verification code will be sent to you. Make sure the address you provided is valid and correct.

Download

Not filled the basic info yet? Click here.

Invalid email address or mobile number.

Email Us

contact@zstack.io
ZStack certification training consulting
Enter at least 2 characters.
Invalid mobile number.
Enter at least 4 characters.
Invalid email address.
Wrong code. Try again. Send Code Resend Code (60s)

Email Us

contact@zstack.io

The download link is sent to your email address.

If you don't see it, check your spam folder, subscription folder, or AD folder. After receiving the email, click the URL to download the documentation.

The download link is sent to your email address.

If you don't see it, check your spam folder, subscription folder, or AD folder.
Or click on the URL below. (For Internet Explorer, right-click the URL and save it.)

Thank you for using ZStack products and services.

Submit successfully.

We'll connect soon.

Thank you for choosing ZStack products and services.

Back to Top